Accessories
To order call toll free: 800-350-9313

SMALL BOX HANDLE
Fits both Chris Cutter and Stone Mason
- Operator levers for Stone Mason & Chris Cutter Machines.

BIG BOX HANDLE
Fits both Chris Cutter and Stone Mason
- Operator levers for Stone Mason & Chris Cutter Machines.

9VZ10 FILTER
Fits Chris Cutter Machines
- 9VZ10 Filter for all Chris Cutter Machines.

ROD WIPER KIT (3.5 IN.)
Used on Chris Cutter Machines
- 5 Piece Kit- One Metal Seal, One 3/8" Seal, One 1/2" Tall Wear Band, & Two 1/4" Seals.
- We recommended replacing any time your ram cylinders are leaking oil.

NON-SINGLE POINT GREASE SYSTEM KIT (4 FT.)
Fits Chris Cutter Machines
- 4-Ft. Chris Cutter Non-Single Point Grease System Kit:
- We offer 14 & 19 piece kits. The following is in each kit:
- Piston Seals, Wiper Seals, Cam Pins, 2 O-Rings for your Cam Bar.

NON-SINGLE POINT GREASE SYSTEM KIT (5 FT.)
Fits Chris Cutter Machine
Quantity Pricing Available
- 5 ft. Chris Cutter Non-Single Point Grease System Kit:
- We offer 18 & 25 piece kits. The following is in each kit:
- Piston Seals, Wiper Seals, Cam Pins, 2 O-Rings for your Cam Bar.

SINGLE POINT GREASE SYSTEM KIT (3 FT.)

SINGLE POINT GREASE SYSTEM KIT (4 FT.)
Fits Chris Cutter Machines
Quantity Pricing Available
- 4-Ft. Chris Cutter 14 & 19 piece kits.
- We offer 14 & 19 piece kits. The following is in each kit.
- Piston Seals, Wiper Seals, Grease Wiper Seals, Cam Pins, 2 O-Rings for your Cam Bars.

SINGLE POINT GREASE SYSTEM KIT (5 FT.)
Fits Chris Cutter Machine
Quantity Pricing Available
- 5-Ft. Chris Cutter 18 & 25 piece kits:
- We offer 18 & 25 piece kits. The following is in each kit:
- Piston Seals, Wiper Seals, Grease Wiper Seals, Cam Pins, 2 O-Rings for your Cam Bars.

NON-SINGLE POINT GREASE SYSTEM KIT (3 FT.)
Fits Chris Cutter Machines
Quantity Pricing Available
- 3-Ft. Chris Cutter Non-Single Point Grease System Kit.
- We offer 11 & 15 piece kits. The following is in each kit.
- Piston Seals, Wiper Seals, Cam Pins, 2 O-Rings for your Cam Bar.

WIPER SEALS (2 IN.)
Used on Chris Cutter Machines
- These Seals are used for Chris Cutters with 2 in. wide teeth. They are located at the top of the tooth hole on the tooth bar.

CAM PINS - Chris Cutter and Stone Mason
Fits Chris Cutter and Stone Mason Machines
Available Types:
- Chris Cutter
- Stone Mason
- Cam Pins for Chris Cutters and Stone Mason Machines.

PISTON SEALS (2 IN.)
- New high quality replacement seals for your pistons.

PISTON SEALS (3 IN.)
- New high quality replacement seals for your pistons.

PISTON WEAR BAND (3 IN.)
Fits Chris Cutter Machines
- 3-Inch Piston Wear Band for Chris Cutters.

WIPER SEALS (3 IN.)
Used on Chris Cutter Machines
- These seals are used for Chris Cutters Machines with 3-Inch wide teeth. They are located at the top of the tooth hole on the tooth bar.